RED PRO Touch 7" LCD ( Hingeless )

[Jarred Land]

RED PRO Touch 7" LCD ( Hingeless )
$2950

http://www.red.com/store/products/red-pro-touch-7-inch-lcd



http://www.redgrabs.com/up/1460920624.jpg

ESTIMATED TO BEGIN SHIPPING IN FALL 2016


The RED® Pro Touch 7.0" LCD offers a high-definition viewing experience for recording and viewing footage on your DSMC® or DSMC2™ camera system. A 1920 × 1136 resolution display panel provides improved color accuracy, high pixel density (at 323 ppi), and 1000:1 contrast. It is also bright enough for operation in high ambient light. A robust, optically-bonded touchscreen provides the most intuitive way to navigate menus, adjust camera parameters, and review your .R3D clips directly out of the camera.


The lightweight display mounts to your BRAIN® or other 1/4-20 mounting surface and provides a LEMOconnection to connect to your camera. The RED Pro Touch 7.0" LCD is an ideal monitoring option for gimbals, cranes, and remote (away from the camera) viewing.


For DSMC2 shooters, use a DSMC2 LEMO Adaptor A (http://www.red.com/store/products/dsmc2-lemo-adaptor-a) in conjunction with the RED Pro Touch 7.0" LCD for convenient mounting options away from the DSMC2 camera BRAIN. For a more ergonomic monitoring solution when you’re on the move, see the DSMC2 RED Touch 7.0" LCD (http://www.red.com/store/products/dsmc2-red-touch-7inch-lcd) featuring a fully rotating and lay-flat hinge design.








DIMENSIONS
Height: 5.24 in. (133 mm)
Width: 7.28 in. (185 mm)
Depth: 1.22 in. (31 mm)


WEIGHT
1.10 lbs (549 g)


MATERIAL
Aluminum Alloy


RESOLUTION
1920 × 1136


PIXEL DENSITY
323 pixels per inch (ppi)


REFRESH RATE
60 Hz


RESPONSE TIME
23 ms (black to white)


CONTRAST
1000:1


BRIGHTNESS
350 cd/m2


COLOR DEPTH
8-bit RGB, 4:4:4 progressive scan (16.7 million colors)


COLORS
70% NTSC


VIEWING ANGLE
± 85° all axes


DISPLAY ORIENTATION
Landscape, 180° rotation


TOUCH
Projected Capacitive (PCAP), multi-touch


BRAIN CONNECTION
Power and Communication via LCD/EVF cable


MOUNTING
26x 1/4-20 mounting points
2x 3/8-16 mounting points


HOOD MOUNTING
M3x0.5 × 5 mm (max depth)


BUTTONS
Up, Down, User 1, User 2


POWER CONSUMPTION
5.5 W (typical)


OPERATING TEMPERATURE
0°C to 40°C (32°F to 104°F)


STORAGE TEMPERATURE
–20°C to 50°C (–4°F to 122°F)


OPERATING HUMIDITY
0% to 85%, non-condensing


STORAGE HUMIDITY
0% to 85%, non-condensing


FIRMWARE REQUIREMENT
Compatible with all firmware v5.2.38 or later

[Mark Phelan]

Back to the future, sort of. You're going to sell a boatload of these. Might even become your most popular version.

[Nick Morrison]

Nice!!

[luigivaltulini]

:party:

[Reuben Evans]

Very cool!

I used my 7" DSMC2 Touch outside yesterday for the first time and it was very visible. A big improvement over the 5" Touch!

(BTW, I think the link above for the DSMC2 RED Touch 7.0" LCD (http://www.services.red/store/products/dsmc2-red-touch-7inch-lcd) goes to an internal link because it asks for login credentials. I imagine you meant to go here http://www.red.com/store/products/dsmc2-red-touch-7inch-lcd)

[Neil Dearman]

wow nice man!!!

[Michael Lindsay]

Thank you!

[Zack Birlew]

Is this compatible with all RED cameras or just DSMC2?

[Bob Gundu]

Is this compatible with all RED cameras or just DSMC2?

For DSMC1 users, the lemo connects just like the old connections. No other adapters needed.

[Brent Carter]

Very cool!

I used my 7" DSMC2 Touch outside yesterday for the first time and it was very visible. A big improvement over the 5" Touch!

(BTW, I think the link above for the DSMC2 RED Touch 7.0" LCD (http://www.services.red/store/products/dsmc2-red-touch-7inch-lcd) goes to an internal link because it asks for login credentials. I imagine you meant to go here http://www.red.com/store/products/dsmc2-red-touch-7inch-lcd)

Fixed : )

[Reuben Evans]

That was quick!

[Brent Carter]

Oh, WTH, you guys who are paying attention early, you might as well order it (http://www.red.com/store/products/red-pro-touch-7-inch-lcd)...

[Brian F Kobylarz]

I love surprises!
This is a very nice - and unexpected - addition to the monitor lineup.

Order placed.
Thank you Brent

[Reuben Evans]

Oh, WTH, you guys who are paying attention early, you might as well order it (http://www.red.com/store/products/red-pro-touch-7-inch-lcd)...

What a guy :-)

[Uros Zuraj]

my 5 cents - just do at least one 1/4 hole that is the center like 3/8

[Phil Holland]

my 5 cents - just do at least one 1/4 hole that is the center like 3/8

Yep, for noga arm/RED arm folks that would be nice. Likely could remove the 4 not centered 1/4"-20 below the 3/8"-16 and replace it with one centered 1/4"-20.

[Brody_B]

I guess I'm having a hard time understanding the difference between this and the old 7" red touch, as well as the dsmc2 7" red touch, other than its ability to fold, and attach without an extra arm.

[Phil Holland]

I guess I'm having a hard time understanding the difference between this and the old 7" red touch, as well as the dsmc2 7" red touch, other than its ability to fold, and attach without an extra arm.

There are people who have their displays on Noga Arms/RED Arms or whatever all day. Having a hung adds additional bulk and perhaps not the perfect rigging placement for some. For others they'll want the flexibility of being able to rig onto the camera.

RED is providing options for all sorts of rigging preferences here.

I'm a cable-less man myself lately.

[Alex Kiritz]

my 5 cents - just do at least one 1/4 hole that is the center like 3/8

You can get size reducer bushings for less than a dollar each and then you never have to worry about messing up the threads in your $3000 monitor.

[Ketch Rossi]

Bam!

Now this is exactly what I was looking for... It fits exactly the purposes for the way I wish to mount it on the Weapon... Thanks for this!

[Jarred Land]

Yep, for noga arm/RED arm folks that would be nice. Likely could remove the 4 not centered 1/4"-20 below the 3/8"-16 and replace it with one centered 1/4"-20.

Ok.

[Kyle Wright]

Ok.

Well, that was easy. Not many companies that address customer wants that fast.

[Uros Zuraj]

Ok.

im taking credit for that 1/4 centered!!! can I get a letter U printed next to it :D

[Brody_B]

There are people who have their displays on Noga Arms/RED Arms or whatever all day. Having a hung adds additional bulk and perhaps not the perfect rigging placement for some. For others they'll want the flexibility of being able to rig onto the camera.

RED is providing options for all sorts of rigging preferences here.

I'm a cable-less man myself lately.

Thanks. Ya i'm thinking cable less for me as well. About to order the Dsmc2 7" soon as NAB is over.

[David Battistella]

Im glad this style is back. I can already see it would be great with a gorilla grip style single arm.

[Daniel Stilling]

http://www.reduser.net/forum/images/icons/icon1.png Today, 01:37 AM

This does look great! My only comment would be, I wish the panel used was one of the new 7" panels rolling out with 1000-1500 nits for true sunlight visibility. I know the contrast ratio on this one is good, and thats a step in the right direction, but these screens really need to be brighter.
Other than that, the form factor is perfect, and with center ¼-20's it'll be just right. Just make it brighter!!

[Andreas Mendritzki]

YAY!!!

[BrandonChristensen]

I didn't know I wanted this until now. Would love a 5" version.

[Jens Jakob Thorsen]

http://www.reduser.net/forum/images/icons/icon1.png Today, 01:37 AM

This does look great! My only comment would be, I wish the panel used was one of the new 7" panels rolling out with 1000-1500 nits for true sunlight visibility. I know the contrast ratio on this one is good, and thats a step in the right direction, but these screens really need to be brighter.
Other than that, the form factor is perfect, and with center ¼-20's it'll be just right. Just make it brighter!!


+1000 Nits on this!

[Lee Dashiell]

Well HOT DAMN! I Likey!

[Evgenios Zosimov]

Well, i hope they have fixed a touchscreen issue in this batch, my 7" failed miserable twice in the last 10 months. No physical damage, touchscreen just dies.

[BrendanLeahy]

Well, i hope they have fixed a touchscreen issue in this batch, my 7" failed miserable twice in the last 10 months. No physical damage, touchscreen just dies.

Which version? Cableless or the DSMC1 7" touch?

[Steve Murray]

Hey Brent / Jarred,

Can we get an update on when these beauties will begin to ship?

[Jarred Land]

Hey Brent / Jarred,

Can we get an update on when these beauties will begin to ship?

October 3rd.

[Ketch Rossi]

October 3rd.


So much is coming in October... 2016 is going to go out with a BANG... And I guess by the look of things 2017 will start with a BOOM... :)

[Matthew Quinn]

Honestly it's been one big announcement after another since last summer.. Fkn insane heh