View Full Version : Stuck in RAW
Chad Nagel
09-19-2010, 12:41 PM
Im on set right n:emote_hanged:ow and have been shooting just fine all day and then between reboots my user keys that toggle view mode from RAW to Clr stopped working!! I have tried other buttons as well with no luck please help!!
Milan Spasic
09-19-2010, 01:17 PM
Im on set right n:emote_hanged:ow and have been shooting just fine all day and then between reboots my user keys that toggle view mode from RAW to Clr stopped working!! I have tried other buttons as well with no luck please help!!
You have to dig thru the menus and change the view back to RedColor manually and everything will go back to normal. User buttons 1 and 2 get locked up occasionally.
Stephen Lovett
09-19-2010, 03:04 PM
I've seen this happen for various reason, usually an operator error.
(I'm not saying that is the case here)
If view is set to raw, your toggle button is functioning correctly, it is just toggling between raw and raw. The view has to be set to Redcolor for the toggle button to work as you want.
Make sense?
Steve
Milan Spasic
09-19-2010, 03:22 PM
I've seen this happen for various reason, usually an operator error.
(I'm not saying that is the case here)
Pretty sure it's not an operator error. My camera is set to RedColor view by default and it often mysteriously gets stuck in RAW. When that happens, toggling the #1 doesn't achieve anything until you go into the menus and switch it back.
Unless there's a shortcut that switches the default view to RAW that I've been pressing by accident and wasn't aware of, this is quite a common problem. And I don't have fat fingers either. :)
Stephen Lovett
09-19-2010, 07:48 PM
Thanks for the heads up Milan,
I've been known to fatfinger a button in my time :-)
Another instance of this is when the camera is set up either inadvertently or on purpose to have two of the buttons set to toggle between raw and color, and thus end up with a "three way switch" and the outcomes there are confusing.
I thought it was just my memory going...
Steve
Stuart English
09-19-2010, 07:55 PM
What build are you operating on Milan?
Milan Spasic
09-19-2010, 08:05 PM
Stuart, currently 30.6.0 for the last couple of shoots. No probs so far.
Last time I got stuck in RAW I was on 30.5.0
Really not a big deal as long as you know what's happening.
The focus assist (zoom) can occasionally do this too (comes back to black/blank screen instead of full view) but toggling the user button #2 couple of times normally clears it.
Stuart English
09-19-2010, 08:37 PM
O.K, the stuck in RAW issue should have been fixed by 30.6.0.
Justen Nguyen
09-20-2010, 04:25 AM
i've had the same issues as Milan. As stated the only thing I've found to fix it is going through the menu and changing it there, or completely resetting the camera. It happened to me a couple times on build 30.5.0, so far I've been in the clear with 30.6.0