Quicktime 7.4.1...

[Joe Vinson]

Has anyone tested?

[Adrian T.]

don't want to burn my fingers... :wink:

[Bing Bailey]

apparently this fixes the issues with 7.4. have you guys tested yet ?

[Jarred Land]

good eye darkkelt...

[Justin Kirchhoff]

this is good news. Apple was on their toes about this.

[Colin Hubick]

I installed 7.4.1 this afternoon, and it's working well.

[Rob Lohman]

Will be testing that first thing tomorrow...

[Casey Green]

Excellent news. Didn't Apple notified you guys?

Hopefully the QT issues on new releases never happens again. I for sure am going to wait for RED's blessing before updating QT next time.

[Gavin Greenwalt]

Hopefully the QT issues on new releases never happens again.

I would agree with this sentiment if they had fixed the problems they introduced 7 point releases ago....

[Daniel Reichenbach]

IT doesn't work here on Tiger 10.4.11

[Simon Blackledge]

Doesn't on Tiger as in ?? ... crashes? Locks AE renders? broke redalert?

[Daniel Reichenbach]

no more preview in quicktime, RedCine crashes and doesn't start anymore...
well, i go back to 7.3

[Andrew M.]

I installed 7.4.1 this afternoon, and it's working well.

What config of your computer do you have?

[Paul Hazlett]

Apple forums have reports of people not being able to log into comps after
update with 7.4.1

I have not tried but considering the fiasco 7.4 was I would wait for the all clear from Mr. Rob to use with Red Cine

[Simon Blackledge]

MacbookPro 2.33 C2Duo
2gig
10.5.1

ATI

Redcine and RedAlert both behaving.. no OS issues so far..

yet to try FCP

Wrapper playback from internal drive is 24 then 12 then 1 then 24 then 6.. v choppy even on the smallest proxy.

s

[Simon Valderrama]

just downloaded the update but most red quicktime previews i have still look white.
better luck next time? :usd:

[Brent@RED]

Yeah, we tested here, too, and found that it does not solve the problem. Stay with QT 7.3.x at this time....

BC

[Levan Bakhia]

it is strange, I had upgraded to QT 7.4 from the day one, and now I did an upgrade to 7.4.1 and I see no problems yet. And also, not on one computer but on several. Strange?!!! hmm

[Warren Kommers]

Wake Up Apple! Get Your Nvidia Drivers Straight And Think About The People That Use Quicktime Professionally So We Can Make The Movies To Sell On Friggin Itunes.

[Levan Bakhia]

by the way, it is off topic but how do I sell movie on itunes?

[Corrado Silveri]

Time to upgrade?

:umm:

[Jeff Kilgroe]

Some things are fixed. Better than 7.4... But still broken as far as RED workflow is concerned. Stick with 7.3.

[Michael Ragen]

i'm just glad the proxies are viewable now.

[Rob Lohman]

No dice :(

Camera generated files still show up as white movies under Tiger with QT 7.4 and 7.4.1....

Best to downgrade to 7.3....

Sorry guys!

p.s. internal macbook/laptop drive can't keep up with 30+ MB/s datarates!

[Rob Lohman]

Levan: it only happens with camera generated files running QT 7.4 or 7.4.1 under Tiger!

RED ALERT / REDLine generated files and running under Leopard do not produce this problem

As Brent indicated I've run some tests and 7.4.1 does not fix this problem...

[Rob Lohman]

7.4.1 does not solve the problems with RED footage....

[Corrado Silveri]

Strange thing.
I'm testing now 7.4.1 under Leopard. And ALL seems to running fine.

Cine, Alert, proxy, fcp.

Just to inform you.

[Jeff Kilgroe]

Elcurado, be careful, that's what I thought yesterday. Then my proxies went haywire and haven't worked since. So I edited my above post to just say that some things were fixed and 7.3 is still the one that works.

My test system has been a Macbook Pro w/ ATI X1600 256MB, 2.33GHz C2D, 2GB RAM, eSATA RAID.

[Rob Lohman]

RED things seem to be fine with Leopard and the new QuickTime. Problem is just under Tiger.

[Geoff Reisner]

I'm running Leopard and the new Quicktime, still have the whiteout issue and prior to this, quicktime image export freeze on just about every other clip.

[Poi Boy]

leopard, 7.4.1 , mac book pro no problems here.
-A
Aloha

[Phan Tran]

Bought the new Mac Book Pro Last week. 7.4.1 on Leopard as well as 7.3.1 still just displays a blank white quicktime when I try to play proxies. Frustrating.

Redcine and RedAlert seem to work, but I've only used them for viewing and checking footage. I haven't tried to output anything yet.

I'm confused as to why some people's system work and others don't. Any news?

Phan

[Jeremy Newmark]

Bought the new Mac Book Pro Last week. 7.4.1 on Leopard as well as 7.3.1 still just displays a blank white quicktime when I try to play proxies. Frustrating.

Have you installed the FCS 2 REDCODE Plugin? It's essentially the REDCODE RAW codec. If you don't have installed yet, you will get a white screen.

[nevinstyre]

I had an issue with proxies not working on my mbp with 7.3.1. I redownloaded and reinstalled the codec, restarted and they can play fine now.
The first time I downloaded I had trouble extracting the installer on the mac pro at work, on my macbook pro it extracted fine but I guess the codec was still corrupt.

I have an older core 2 duo macbook pro with the x1600 gpu and have never had 7.4+ installed on it.

[Phan Tran]

Have you installed the FCS 2 REDCODE Plugin? It's essentially the REDCODE RAW codec. If you don't have installed yet, you will get a white screen.

Thanks Jeremy. Didn't even think of that because I haven't installed Final Cut Pro yet, but that did it. I'm in business now. WooHoo!

Phan

[gbalaji]

I'm running under Mac OS X 10.5.2, Quicktime 7.4.1, Red Alert 1.5.6 and Red Cine 1.0.4 in MacBook.

Quicktime proxies, Final Cut Pro 6.0.2, Red Alert and Red Cine working properly.

[engine]

I installed the redcode qt plugin (from the support area) on a tiger and leopard machines. I can see the pictures on the leopard machine but not on the tiger installation. (just see a white frame) Both systems are on QT 7.4.1 and intel cpu's. Does the red codec only work in leopard?

regards
John Agapitos
Engine
www.engine.net.au

[Tar]

i'm just glad the proxies are viewable now.
I can view the proxies in QT (7.4.1) fine but I can't export to ProRes using the F proxie, only H. Just did a shoot that was mostly 4K with some high speed 2K, would like to convert all clips to 2K ProRes. When I try to export the F proxie I the picture shows up about 8 times and is different shades of green.

Anyone else have this problem? Any suggestions?

[deedive]

i have quicktime 7.4.5, and fcp 6.0.3 and when i export i get a white screen that sometimes changes to different colors in the shape of the actual footage. The footage views fine in quicktime and fcp just wont export. i install the codec twice. It just wont export from the 2k proxies. :(