PVW monitor , My monitor is ?

[Vigen Vartanov]

Good day. I'm looking for PVW If you can just post your monitor and why you select it . Price , size , etc .
Thanks.
My PVW Monitor is xxxxxxx :)

Did RED LCD + PVW will come true in new versions. ?

[Rich Schaefer]

I love the Panasonic BT-LH900a!!! The picture Rocks! I light from it all the time. It is heavy and pricey but ya get what ya pay for. It is a very good looking picture.

Good Luck on your quest!

[Corrado Silveri]

Great monitor (the Pana). Agree.

[Steen Linde]

Can this monitor take the 720P 50P signal from the camera?.
I tried with that monitor, and i got this message on the screen:
" unsupported signal".
Then I took the bigger 17" panasonic monitor and connected to the camera and I had a picture again.

[Vigen Vartanov]

Did some body test some Marshall Lcds , with 720 p .. Thanks.

[Vigen Vartanov]

Panasonic BT-LH1700W :)

[Carl Larsen]

nebtek

[Vigen Vartanov]

nebtek - is nice one. But can you tell me model with can support 720p.
On http://www.nebtek.com i didn't found detail information for monitors.

[Gunleik Groven]

I dunno what PWV means, but I'll use the Panasonic BT-LH1700W & probably a Dell 24". in studio

Gunleik

[Carl Larsen]

nebtek - is nice one. But can you tell me model with can support 720p.
On http://www.nebtek.com i didn't found detail information for monitors.

NEB70HD or NEB70HDS... Both panels are actually 800 x 480, but they look great in my opinion.

I will say, however, that I did have to get mine serviced because of bad firmware when it first shipped (I got one of the very early production models)

Rob, their service guy, was great to work with.

[Scott Webster]

Can this monitor take the 720P 50P signal from the camera?.
I tried with that monitor, and i got this message on the screen:
" unsupported signal".
Then I took the bigger 17" panasonic monitor and connected to the camera and I had a picture again.

Steen,

If your BT-LH900 is the 900 rather than the 900A you won't have 720/50p support.

Quick tests this morning showed you have to re-boot the camera if changing from 59.94 to 50 for the correct output.

Sony LMD-9050 is fine for 720 50p.

[Vigen Vartanov]

DeckLink HDLink :) We have it , but it is not working with Red Output. With Multibreage Pro on Power Mac we can get picture in FCP , but with HD Link + Cinema Display no .
From Web Page

Standards
HD Format Support via DVI-D 1080p23.98, 1080PsF23.98, 1080p24, 1080PsF24, 1080p25, 1080p30, 1080i48, 1080i50, 1080i59.94, 1080i60, 720p50, 720p59.94 and 720p60. 1080p23.98, 1080PsF23.98, 1080p24, 1080PsF24, 1080p25, 1080p30, 1080i48, 1080i50, 1080i59.94, 1080i60, 720p50, 720p59.94, 720p60, 2048 x 1556p23.98 and 2048 x 1556p24.
HD Format Support via HDMI 1080p25, 1080i50, 1080i59.94, 1080i60, 720p50, 720p59.94 and 720p60.
SD Format Support via DVI-D 625/25 PAL and 525/29.97 NTSC.
SD Format Support via HDMI Not supported. 625/25 PAL and 525/29.97 NTSC.
SDI Compliance SMPTE 292M, SMPTE 259M, SMPTE 296M, ITU-R BT.656 and ITU-R BT.601.
SDI Video Sampling 4:2:2 and 4:4:4.

So it must work with RED. Can some body nows why it is not working.
Thanks .

[Scott Webster]

DeckLink HDLink :) We have it , but it is not working with Red Output. With Multibreage Pro on Power Mac we can get picture in FCP , but with HD Link + Cinema Display no .

So it must work with RED. Can some body nows why it is not working.
Thanks .

Possibly the output of the Red HDMI 1280 x 848 resolution is what is throwing your HDLink.

Going HDMI to DVI seems to work for most, but not all. Our HP 2335 LCD's via HDMI to DVI cable work.

Pg 12 ops manual.

[Vigen Vartanov]

Now it working :) I make update of HDlink and it is working. Sow for me it is nice solution because i have Hdlink.
HD LINK + Cinema Display Ready Solution.
Any other solutions. ?

[Jan Prochazka]

RED and 60Hz consumer LCD's... how bad is it?

I mean - most of regular PC's LCD's are stuck with 60Hz sampling frequency. What will happen if you feed them with 1080/24p or 1080/25p ? They just turn black or do they kind of "oversampling"? If do, how it looks like in motion? Is it smooth or "jerky"?

I have Eizo FlexScan HD2441W (http://www.eizo.com/products/lcd/hd2441w/index.asp) in my mind. Looks cool, good price also, only concern is that vertical frequency.

[Vigen Vartanov]

Today i will have some shoot. I will test monitor. And will post about it , we only test that it works and then turn it off . It look like fine . And also with Hdlink software you can manage RGB on monitor, like making profile and uploding it to HDLINK.

[erichfernandez]

Hi!, Does anyone have any idea about this, i'd like to know if the BT-LH1700W could show the wave form from RGB inputs YPbPr?, or is it just composite? or SDI only?

[Carlo Rho]

Anyone tried the JVC DT-V17L2DU?
It's almost like the Panasonic BT-LH1700W (without waveform) but with a DVI port, make me thinking about playback of backed-up clips on set straight from my MacBookPro...

[Andrae Palmer]

Hi!, Does anyone have any idea about this, i'd like to know if the BT-LH1700W could show the wave form from RGB inputs YPbPr?, or is it just composite? or SDI only?

Very late answer... but yes it can.