Search:

OK, I´ll drop them a line. Thanks for setting this up.

Cheers, Ulf

Jay, I pm´d you a few days ago, any chance we could get this extended to outside US/Canada?

I built up a set of Nikkors (Nikon manual Ai) and I enjoy the their kind of vintage look. I am curious how they might compare to the FDs? Enough difference to justify a second set and new mount?...

Yeah, definitly light control. Placing a solid or translucent flag to prevent lighting from the top or from one side suddenly makes the keylight move to the non flagged side. Look at BTS from...

I won´t buy the 546 once more, we did not use it much but it had already started giving us trouble. The 536 carbon sticks are lightweight and working well - much more in use here and no sign of wear....

We sometimes use a chimera pancake lantern. The light is not spreaded everywhere, the top is silver coated inside, therefore you have a higher directional light output. Also don´t forget the skirt,...

?? This is the first time I hear of such. AFAIK the worst condition for the bulb is the startup period from cold until it reaches its working temperature. A good designed electronic ballast will...

These 1200W bulbs operate at AC 100Volts and have to be driven by a specific ballast, either magnetic, which means they will operate at local line frequency or via an electronic ballast. The...

Probably also too expensive, but I´ve worked with broncolor HMI lights. They are IP54 which means you can put them into pouring rain without any trouble. Great experience. You need to dry your stands...

George, you won´t be able to connect both, the EVF and the TouchScreen without adding a module like stated before. There is only one connector on the DSMC bodies.
You will be able to use a third...

These are working well for us:

http://www.manfrotto.com/small-hydrostat-arm

Heared good things about foba as well, but I have no personal experience with them.

Cheers, Ulf

It pretty much depends on your image / subject. If you need to see a lot of details, e.g. a full body shot for fashion you will feel limited. For a closeup of a face with shallow depth of field you...

Just to make sure as it also might be the directory is corrupted I´d suggest to perform a secure format in camera. We had a corrupted directory on a card once.

Cheers, Ulf

Also try to secure format your Redmag. (Media> Utils>SecureFormat. Keep in mind after performing a secure format on this REDMAG you will not be able to retrieve any footage recorded to it prior to...

Just to make sure, if your footage is recorded OK, did you check you´re not only viewing in RAW?

Yes, definitely go with 5K, don´t even think about cropping the sensor. In fact, for shallow DOF it´s all about image ratio and a fast glass, focal length does not help.
Additionally all advice from...

Hi Ryan,

the thread length is around 7,7-8mm, it´s a button head type. Thread size should be M4. HTH.
I would order them from RED, though.

Cheers,
Ulf

Jon, I did not really experience any noise problems with my Scarlet yet, in fact I find it quite pleasing, for me it adds a little life/organic feel to the digital image. I used to follow this two...

Nathaniel, thank you for your answer. That is what I thought, my question was initialized by experiencing recording errors from which I thought they might have been temperature related (prior to any...

Thank you Eric, just to be sure, you are talking about 37°C sensor temperature (the first number displayed) what about the second temperature (core). I am asking because I recently had recording...

I am wondering what would be a good working temperature range for the EPIC. Obviously the cooler the better (less noise) but there might be situations where you don´t want the fan to disturb the...

Just curious why nobody suggested Chrosziel, we recently acquired a MB450R2, couldn´t be happier.

Cheers,
Ulf

AFAIK, although not officially supported the iris control on manual Nikon glass should be correct up from the AI-S versions, the aperture pin was calibrated/linearized for iris control since the...

Jonas,

I had the same issues with my Nikon lenses. The aperture on these lenses is controlled by a motor in the Red Nikon mount, so it won´t be an issue with a build in iris control like in the...

Hi Richard,

Poor CRI is usually caused by missing wavelengths in the visual spectrum. As you cannot add missing colors through filtration the CRI will unfortunately remain bad. That said,...