Search:

Scarlet-X #00845 "34D"

Does this failure only occur when trying to build an ISO? Can Encore 'play' through the point of failure?

If the point of failure is constant, I would suggest building a new time line that...

It is running well on a XP32 2.4 quad core, 4 GB and a GeForce 8800 GTS with 512 MB here, will test on a few other platforms ASAP.

Great job RED and Adobe, this makes my day!

Both PAL and NTSC SD use non square pixels. In the case of a 4:3 PAL project, the PAR (pixel aspect ratio) is 1.094. If you use 720 x 576 with a PAR of 1.094, you will get a proper 4:3 result.
...

To absolutely avoid aliases, the highest sampled frequency sampled must be <.5 the sample rate (where the phase relationship between the excitation and the sampled system is random). This can be...

You might be surprised how expensive of upstream device would be required to better the new audio board.

By the way, glad to see another Fullerton'ite on this site.:shifty:

"The Grifters"

CS4 working well here too. I would suggest that despite having this experience on several systems, the problem might lie elsewhere. Besides CS4, what else is common to all these systems? I would...

For the miniXLR that is stuck, you might want to try the following:

Put a bit of pressure on the mini plug (as if you were inserting it into the socket) and at the same time use a small tool to...

Well, then that does define which of the two categories you fall into!

You may want to consider using a set of short pig tail cables to save the wear and tear on the connectors within the camera. These could be mini to mini or mini to full sized. Either is fine, but...

I will be happy to check this capability later today when I get back in front of a machine with PPro CS4 installed on it.

More to follow...

That would be interesting, but via what path? OnLocation connects to video sources via 1394a. This interface is not present on the RED ONE as well as lacking sufficient bandwidth for this type of...

The value of higher sample rates is not exclusively the added bandwidth they allow; a much more useful benefit is the much improved aliases rejection made possible by the higher sample rate. ...

You might want to try Film Emporium. I have purchased stock (and production insurance) from them in the past.

http://www.filmemporium.com/

I can hardly wait!

Really nice macro work Bassam!

What glass did you use to shoot these?

WOW!!!!!!:w00t:

Yep I gotta agree, full native .r3d support in Adobe products would certainly put a big smile on my face! :biggrin:

I am sad to say that at this time we won't be accepting any new orders for our FD mount system. I will be in contact with current owner's to explain what can be done (and what the performance...

I have resisted the temptation to jump in and comment until now. Really, up until a few days ago, I wasn't aware of any problems with our or anyone's else’s mounts causing problems. In fact, I...

You will need to connect (solder) to the strain relief of the TA5 to pickup the body ground of the plug. This needs to be electrically connected to pin 1 of both XLR connectors via the shield of the...

With the very low cost of storage on the RED, why would anyone want to take the chance?

I just got a support telephone call the other day from a crew shooting a feature on two REDs in Alaska. ...

One looks to be a wittiness mark.

Yes, in the case of the specific FDs that I tested, they resolve well beyond 4k.

What I am not making is the claim that cine glass isn't often better in a number of other areas (longer focus...