User Manual IMS Conversion for RED One camera

[Sanjin Jukic]

User Manual IMS Conversion for RED One camera




User Manual IMS Conversion for RED One camera online ready for download.

"The following lens mounts can be used with the P+S Technik Interchangeable Mount System on the RED camera:

Arri PL Mount, Panavision Mount, BNC-R Mount, Professional F-Mount, Nikon F-Mount, Canon EF-Mount, Canon FD-Mount,

Contax Mount, Leica-R Mount and Leica-M Mount."

IMS conversion for RED One should be ready to ship (hopefully starts next week!?).

More about IMS on RED>>>

[Gary Stone]

warranty: voided.

[Bruce Allen]

warranty: voided.

On the other hand, he is now the only guy in the world with a Red camera which doesn't have the "long throat" Brook was criticizing in his ergonomics thread... plus he can finally mount lenses other than just Nikon and PL. I think the value of his camera just went up!

Bruce Allen
www.boacinema.com

[Martin Weiss]

warranty: voided.

I have the hope that the fact that we haven't heard anything concrete neither from P+S nor Red means that there is something happening behind the scenes.

After all, the former has already a technical Oscar, and the latter certainly deserves one.

[Corrado Silveri]

Thanks Sanjin!
I've just ordered mine... They said that they will ship my items in two weeks.
Ciao!

[Sanjin Jukic]

Also don't forget important info for Nikkor lens users:

23499 Professional F Mount incl. a clam ring for a maximum hold of the lens, when using manual follow focus or motorized lens control systems.

18381 Nikon F Mount Note: Do not use Nikon AF lenses with this mount, the lens may not release without damage !



LINK>>>

[Paul Hazlett]

the chart above has adjustment shims for PL mount?
does this mean you need to mount PLs in the same manner as before, meaning a trip to the lens technician?

[Sanjin Jukic]

the chart above has adjustment shims for PL mount?
does this mean you need to mount PLs in the same manner as before, meaning a trip to the lens technician?

It's written above very clear and also the shims are not for RED PL mount:

"Mounting Instructions

a) Remove 8 screws from the inner ring of the RED camera mount and
carefully remove the mount

b) Carefully place shims (3) and flange (2a) on the camera front instead
of the original mount. Make sure the shims are not folded and the screw
holes are accessible.

c) Fix eight screws as shown in the drawing

d) Screw cover ring (2b) onto the flange ring

e) Add position screw (6) as shown in the drawing far left."

During installation process try to be very careful and don't make any wrong step that something

breaks the camera, otherwise it would void warranty and you pay for it (not RED, nor even the 3rd party).

[Paul Hazlett]

It's written above very clear and also the shims are not for RED PL mount:

I was actually reffering to the manual in post #6 in the notes section right
next to #1 pl mount its says shims are available, which makes me think you need shims for PL, this might not be the case it just looks that way

[Gunleik Groven]

I really prefer the RED way of adjusting backfocus...