i noticed that if the camera fully drains the batteries the charger has more problems that usual
try to change batteries before they go under 10% and your problems will be less
Jeroen Hendriks
|
|
i noticed that if the camera fully drains the batteries the charger has more problems that usual
try to change batteries before they go under 10% and your problems will be less
Jeroen Hendriks
How can i chabge charging mode from normal to fast
my batteries full charge less tan 2 hours ??
i have read something that is takes 8 hours for normal full charge
And this what i want ...how ?
OOps, my English is so bad. Sorry
Brice
Charging the battery is a three step process.How can i chabge charging mode from normal to fast my batteries full charge less tan 2 hours ?? i have read something that is takes 8 hours for normal full charge
a) Prepare the battery for fast charge
b) Fast charge the battery (this takes it to about 80% capacity)
c) Top up the battery
With the current charger firmware steps a) and b) will be completed in around 2 hours, and if there is a second battery connected, the charger will switch over to do those two steps on the second battery after its completed them on the first, and then return to the first battery to complete step 3 etc.
So for a full charge on both batteries its an overnight charge timeline, but for 80% capacity you should be able to get away with 2 hours per battery.
Thanks Stuart . i can understand something here
If i want to full charge batteries then i should put them both on a charger and leave them ? is that correct ?
for how long the (c) charging mode it will take's ?
EDIT : OKAY .. OKAY
UNDERSTAND NOW .THANKS
Did you check if your battery was worm after removing from the cam? You have to wait a little bit, about 10 or 15 min. that the battery cool down. The charger will not start with the hot battery on it.....
| « Previous Thread | Next Thread » |