Build 16v3.2.1 sync w/DIVA & 16G CF!

[James Brundige]

Thanks for these great workflow suggestions.

Now let's hear about a mixer/camera interface that will work without an extra $20K of equipment. What is the best protocol for using a common mixer to feed the red? Are the Red padded cables sufficient, or do they compromise signal to noise ratios?

[Tai Wah Lim]

Mark L Pederson, I am not an audio person so is a little confused here. You explained earlier that unless if there a need to do video sync say a 3D, there is really not need to use the tri-cycle. Your connection will be to feed the TC from the Diva to the Denecke SB-3 - where?, which is connected to the Genlock using the BNC out instead of TC in on the camera using the lemo version? and then jammed them together? and then disconnect the TC - from where - connection from the Diva to the Denecke?

Appreciate if you can elaborate more on this - Lim

Mark?

[Mark L. Pederson]

Mark?

You can get the deneke with a lemo 5 pin option. The unit we had did not have lemo. It had BNC for TC in, BNC for TC out, and BNC to TRI-level out.

We had a lemo 5 pin to BNC made for TC out of the camera to TC in of the Deneke.

[Tai Wah Lim]

You can get the deneke with a lemo 5 pin option. The unit we had did not have lemo. It had BNC for TC in, BNC for TC out, and BNC to TRI-level out.

We had a lemo 5 pin to BNC made for TC out of the camera to TC in of the Deneke.

Thanks Mark. Still confuse - are you using the Camera TC out ie Camera as the Master clock - ie B16 3.2.1 TC out feature? Why connects through the Denecke and then to the Zaxcom TC in? and then you mentioned disconnect - which ? Denecke to Zaxcom. Can't you just connect the Camera TC to Zaxcom to sync? Lim

[Mark L. Pederson]

Thanks Mark. Still confuse - are you using the Camera TC out ie Camera as the Master clock - ie B16 3.2.1 TC out feature? Why connects through the Denecke and then to the Zaxcom TC in? and then you mentioned disconnect - which ? Denecke to Zaxcom. Can't you just connect the Camera TC to Zaxcom to sync? Lim

TC FROM the Zaxcom to the Deneke - disconnect - Deneke to RED - but now, yes, with the new build you can go the other way ... if you are so inclined.

[Tai Wah Lim]

TC FROM the Zaxcom to the Deneke - disconnect - Deneke to RED - but now, yes, with the new build you can go the other way ... if you are so inclined.

Mark, thanks for the clarification - Lim

[farroutpro]

Thanks for these great workflow suggestions.

Now let's hear about a mixer/camera interface that will work without an extra $20K of equipment. What is the best protocol for using a common mixer to feed the red? Are the Red padded cables sufficient, or do they compromise signal to noise ratios?

Please read this test conducted by Sound Devices
http://www.sounddevices.com/notes/cameras/red-one/

[Audio SMC]

What frame rate (RED, DEVA & Syncboxes) did you use for your test ?

[Mark L. Pederson]

What frame rate (RED, DEVA & Syncboxes) did you use for your test ?

everything we did was 23.98 fps for a specific project - we didn't have time to do 25, etc.

[fatfatjames]

Glenn, i was trying to get a quote to buy one Diva quite urgently for a shoot. My usual A/V contact in CA could not get his local distributor to respond. Who should we contact to get one to Singapore. Lim

Hi... you can get a Deva from team 108 now come in 3 version deva fusion, deva 5.8, and deva 16... take 30 days for delivery...

James

Location Sound Recordist
Singapore