Thread: Unsuccessful firmware upgrade

Reply to Thread
Results 1 to 4 of 4
  1. #1 Unsuccessful firmware upgrade 
    After firmware upgrade only RED logo appears, then 4,7'' screen goes dark. Fans are working as usual, but the camera is not functioning. Hard reset does not help.
    Hoping for any feedback or recommendations!
    Reply With Quote  

  2. #2  
    Moderator Phil Holland's Avatar
    Join Date
    Apr 2007
    Los Angeles
    How long are you leaving it before powering down? Occasionally if there's a firmware update that might impact a screen I noticed you might lose picture for a bit. I'd leave it powered on for about 10 minutes and see if it's trying to complete an update. Also, make sure you are using the appropriate Raven firmware.
    Phil Holland - Cinematographer - Los Angeles
    ________________________________ IMDB
    PHFX | tools

    2X RED Monstro 8K VV Bodies and a lot of things to use with them.

    Data Sheets and Notes:
    Red Weapon/DSMC2
    Red Dragon
    Reply With Quote  

  3. #3  
    Thank you, Phil. Im leaving it for much more than 10 minutes and nothing happens.
    Reply With Quote  

  4. #4  
    Senior Member Simon_G's Avatar
    Join Date
    Aug 2016
    Brisbane, AUS
    Quote Originally Posted by Yuri Polyarush View Post
    Thank you, Phil. I’m leaving it for much more than 10 minutes and nothing happens.
    I would check if your getting vision out via HDMI if you can,
    I think I remember reading once someone had contact issues between the brain and the monitor after an update, so maybe power down and remove and give contacts a bit of a blow?

    The fact that you are getting something is good news to me over a complete blank screen.
    I have not updated my firmware for a bit now, so not super sure myself.
    Reply With Quote  

Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts