Blackmagic Camera Update July 2020

[rand thompson]

Since I'm giving settings to my grades, below is the .DCTL Script grade for the Vimeo Video I made above. Plus a link to the thread that shows where I got the OFX tool "Filmgrade", where to install it, and how to use it in Resolve.




Thread
http://www.reduser.net/forum/showthr...AGON-to-EPIC-W


DCTL Script Grade File

good for 7 days
https://we.tl/t-YC7nO8gt83


Settings in Resolve and Filmgrade

Resolve





Filmgrade

[Paul Jonathan]

Hi.

Obviously over two hours the exposure changes a lot. I was chasing it, started with LEE ND2.1, then switched to 1.2 and then nothing.

It wasn’t corrected other than the SOC look that was applied so you’re seeing dailies.

I used CP3 and some CP2 lenses.

The wides below 25mm are CP3. I had 15mm, 18mm and 21mm and then a lot of the long lenses are 135mm and 100mm. A couple of 85 and 50mm shots too.

Thanks for the detailed reply, once again! So no UV filters used? And everything above the 25 would be Supremes as that is what your other tests were shot on?

The weather and islands are quite far away, something like 3-4 miles. It’s hard to pixel peep sharpness and resolving power on a cloud :-)

JB

Haha yes, in particular on a highly compressed online upload..

[John Brawley]

Thanks for the detailed reply, once again! So no UV filters used? And everything above the 25 would be Supremes as that is what your other tests were shot on?

Which tests are you referring to ? I’ve shot both Supremes and CP’s publicly. Many others not publicly.

JB

[rand thompson]

IBC 2020: Blackmagic Design's Bob Caniglia



By postPerspective

[rand thompson]

Blackmagic URSA Mini Pro 12K Got Upgraded With More HFR and Stills Options


By YOSSY MENDELOVICH for Y.M.Cinema

I'm interested in these new "12k Luts" they mention.


Article
https://ymcinema.com/2020/09/21/blac...tills-options/




https://www.blackmagicdesign.com/sup...4b1e87e08e494b

[John Brawley]

Blackmagic URSA Mini Pro 12K Got Upgraded With More HFR and Stills Options


By YOSSY MENDELOVICH for Y.M.Cinema

I'm interested in these new "12k Luts" they mention.


Article
https://ymcinema.com/2020/09/21/blac...tills-options/




https://www.blackmagicdesign.com/sup...4b1e87e08e494b

They’re taking about the 12k camera, not 12k LUTs.

JB

[Misha Engel]

From Captainhook:

With the 7.0 update that has just gone live on the site, the read out speeds on the 12K are now:

12k 17:9 -> 15.55ms
12k 2.4:1 -> 12.27ms
8k 17:9 (full FOV) -> 7.78ms
4k 17:9 (full FOV) -> 7.78ms
6k Super16 -> 7.78ms
8k 2.4:1 (full width) -> 6.13ms
4k 2.4:1 (full width) -> 6.13ms
4k Super16 -> 3.89ms

And some new footage from John Brawley


No sound, no grade either, just the "extended" video grade.
All 12K and shot Q3.
2 x 256gb cards over the two hours.
NDs in front over the internals (LEE IRNDs).
All shot at ISO800.
All at 24FPS

And it's shipping in Thailand

[Note Suwanchote]

Shipping elsewhere too. I'm seeing images on Instagram if you search under the hashtags: ursaminipro12K

[Karim D. Ghantous]

[B][I]Blackmagic URSA Mini Pro 12K Got Upgraded With More HFR and Stills Options

I'm not really sure that I'd be using this for stills, as impressive as the sensor is. ;-)

[rand thompson]

Karim,

If I owned one, I don't think I would use this for stills either.