The latest release version of RED ONE camera firmware has been posted on www.red.com/support : Build 20 RED ONE Firmware, v20.1.3. This is a password-protected download.
SUMMARY: Enhanced Color Matrix, with decreased Blue channel noise, especially under tungsten lighting, increased skin tone accuracy on RED-EVF, RED-LCD, and HD-SDI outputs, modified False Color meters for RAW, REC709 and REDspace views, modified Zebra 1 and 2 defaults, modified microphone level default, 48V Phantom Power maintained over power cycle, fixed "audio codec error" and "green flash" on audio enabled clip play back from RED-DRIVE, fixed camera reboot on clip playback from RED-DRIVE, fixed camera reboot on communications error from S4/i lens data port, corrected Look Around area on HD-SDI and HDMI outputs for 4K ANA / 3K ANA / 2K ANA modes, changed USER KEY 4 to VIEW RAW, changed USER KEY 5 to COLOR.
Read all instructions contained in the installation readme file before proceeding with download.
WARNING: Exposure assist tools in this version of firmware have been updated as follows: Adjusted Sensor RAW meter highlight clip indication response, Adjusted black level response of RGB monitor path / RGB Histogram / HDMI / HD-SDI output(s), Corrected FALSE COLOR error in VIEW RAW mode, Re-calibration and simplification of FALSE COLOR overlay for RAW, REC709 and REDspace.
NOTE: RED ONE camera firmware v20.1.3 resolves many, if not all, of the camera reboot issues. If you still experience issues on record or playback with a RED-DRIVE, please contact tech support at www.red.com/support to assist you further.
NOTE: The RED ONE Operation Guide v20.1.3 is a new format with significant revisions to content. Please PM me if you find any typos or with any other feedback.
If you have any other general questions or feedback about Build 20, contact tech support at www.red.com/support .