Click here to go to the first RED TEAM post in this thread.   Thread: Split Compression

Reply to Thread
Page 1 of 4 1234 LastLast
Results 1 to 10 of 53

Hybrid View

  1. #1 Split Compression 
    Banned
    Join Date
    May 2007
    Posts
    31
    After reading this post:

    http://www.reduser.net/forum/showpos...9&postcount=38

    I took a closer look at this image(48MB TIFF):

    http://www.hdforindies.com/uploaded_...02_001_OCN.tif

    After messing with levels and looking at the blue and green channels by themselves there is a noticeable change in the texture of noise in the sky between the top half and bottom half of the picture.

    The change happens exactly(to the pixel) in the middle of the picture and is visible on both sides of the car.

    To me it looks like that the top half of the image and the bottom half are being compressed independently of each other. It is probably much more apparent on images like this one where the top half and bottom half are very different.

    I wonder if this is baked into the hardware of if it is something that could be changed with different firmware.

    Graeme?
    Reply With Quote  
     

  2. #2  
    Probably the amount of data generated by the sensor exceed the bandwidth available from a single processor
    in these case it could be handled by two separate chips one for the top half one for the bottom half.

    In these case something isn't working properly giving different results.

    it looks like the image has been processed with a soft median filter

    Maybe an adaptive noise reduction filter is applied when capturing
    so if like in these shot:
    the top part is mainly sky
    while in the bottom half has more elements with different colors and noise patters.
    In these case an adaptive filter would have read two different scenarios applinig different corrections!

    This joust an idea i've no knowledge about how Redone really works.
    Reply With Quote  
     

  3. #3 Best guess 
    Here's my guess: The top half of the frame is mostly blue with very little detail. The blue channel got most of the bandwidth there, hence more detail in the blue channel as seen as grain. The bottom half has very little blue and lots of detail, so the red and green channel got nearly all the compression bandwidth. Blue didn't need much info for the bottom. Good info to know if you plan to do green or blue screen VFX work. Up until last week, I think most of us had never worked with 4K moving picture files (even though I'm just playing with files you guys have posted). RED truely is 4K for the masses!

    Here's the images we're talking about:




    That came from the uncompressed file of this:


    It would be best to also read this whole thead as well:
    http://www.reduser.net/forum/showthr...?t=4330&page=5
    Reply With Quote  
     

  4. #4  
    Senior Member Miltos Pilalitos's Avatar
    Join Date
    Jan 2007
    Location
    Athens, Greece
    Posts
    966
    I have noticed the same thing way back when the first frames from "Crossing the line" were posted. I didn't want to mention it back then because it was from a beta camera.

    I don't think the reason is that one particular channel is taking all the bandwidth. You can see the same effect in the following frame even if you don't watch a particular color channel. Observe well...


    For a full frame: http://www.red.com/skin/img/gallery-still/009000.jpg

    the split is exactly on the middle of the frame!
    Miltos
    www.pilalitos.com
    EPIC-X #418, RED-MX #1473, RED ZOOM 18-50, RED ZOOM 50-150, Duclos Tokina 11-16
    Reply With Quote  
     

  5. #5  
    Banned
    Join Date
    May 2007
    Posts
    946
    Quote Originally Posted by Miltos Pilalitos View Post
    I have noticed the same thing way back when the first frames from "Crossing the line" were posted. I didn't want to mention it back then because it was from a beta camera.

    I don't think the reason is that one particular channel is taking all the bandwidth. You can see the same effect in the following frame even if you don't watch a particular color channel. Observe well...

    For a full frame: http://www.red.com/skin/img/gallery-still/009000.jpg

    the split is exactly on the middle of the frame!
    is that a wavelet based jpeg2000 or a normal 4:2:2 jpeg recompress? If it 4:2:2 it will screw with the blue, and the red a little too
    Reply With Quote  
     

  6.   Click here to go to the next RED TEAM post in this thread.
  #6  
    Quote Originally Posted by ronx View Post
    is that a wavelet based jpeg2000 or a normal 4:2:2 jpeg recompress? If it 4:2:2 it will screw with the blue, and the red a little too
    We don't do 4:2:2
    ROBCODE Santa Claus @ RED

    "You get the chicken by waiting for the egg to hatch, not by smashing it with a hammer" - Jarred
    Reply With Quote  
     

  7. #7  
    Senior Member Luis Otero's Avatar
    Join Date
    Dec 2006
    Location
    Orlando, FL
    Posts
    948
    De-Ja-Vu from JVC Split screen issue?
    Reply With Quote  
     

  8. #8 City Split 
    Here's a split example in the City file as well:


    You have to tweek the contrast really hard to see it.
    Reply With Quote  
     

  9. #9  
    Senior Member Miltos Pilalitos's Avatar
    Join Date
    Jan 2007
    Location
    Athens, Greece
    Posts
    966
    Quote Originally Posted by Luis Otero View Post
    De-Ja-Vu from JVC Split screen issue?
    Are you suggesting that Mysterium's secret is that it's actually 2 CMOS Chips?
    Miltos
    www.pilalitos.com
    EPIC-X #418, RED-MX #1473, RED ZOOM 18-50, RED ZOOM 50-150, Duclos Tokina 11-16
    Reply With Quote  
     

  10. #10 SkyTower 
    After looking very hard, the split can be seen here slightly in the Skytower shot (this is 100% zoom and the contrast and brightness really cranked.) Interesting because the the city shot is from the same camera under similar lighting conditions.



    This is nothing when compared to the original JVC split processing problems. I'm not worried. In fact, I'm pretty happy with the image I get on my Canon XH-A1 most of the time. RED's image is far superior to it.
    Reply With Quote  
     

Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts