Conversion LOMO lenses with OCT-19 mount on PL mount for RED ONE , Canon 7D

[Sergey Kravchenco]

I am offer conversion LOMO lenses with OCT - 19 mount on PL mount .
Below you can find photos of lenses that we made earlier . PL mount was made from stainless steel .Focus gear rings made from hard aluminum black anodized ARRI standard 32 pitch .For request of buyers it is possible to reengrave focus scale in feet .
For additional information please contact with me

sergastr@list.ru

sergastr@yahoo.com

[Sergey Kravchenco]

I am offer conversion lenses with any mount on PL .Below samples of conversion LOMO roundfront anamorphic F = 100/2.8 .LOMO was made many roudfront anamorphic lenses F = 50/2 and F = 75/2 and very little F = 100/2.8 and F = 150/2.8 and after 1970's stopped to produce anamorphic F = 150/2.8 therefore it type of lens rather rare and rather old and many users ask me to find anamorphic F = 150/2.8 or 100/2.8 lenses .For conversion was used front anamorphic part from LOMO roudfront F = 50/2 type 35BAS22-1 and after was made rear part ( submount ) with new iris ring - material hard aluminum , black anodized . In new anamorphic lens used optical block from LOMO prime lens OKC2-100 - 2 , F = 100/2.8 , for conversion F = 150 /2.8 used optical block from lens OKC1-150-1 .Lens PL mounted ( stainless steel ), has focus gear ring ARRI standard 32 pitch ( module 0.8 ) made from hard aluminum .Lens comes with lens support for heavy lenses for 15 mm rods or 19 mm .
Glass is clean , multicoating fine not damage , mechanism of movement freely , during assembly lens was servised .Focus scale marked in meters , but for request of buyers it is possible engraving scale in feet.
If you have any question or need additional photos , please contact with me .

Lens weight - 2.1 Kg
Length - 220 mm





Best regards

Sergey

sergastr@list.ru

sergastr@yahoo.com

P.S. - If you have LOMO anamorphic roundfront F = 50/2 or 75/2 and wish to have F = 100/2.8 or F = 150/2.8 in your set you can contact with me .

[Sergey Kravchenco]

On photos LOMO prime lenses before and after conversion on PL mount

[Sergey Kravchenco]

F.S. - Focus Gear rings for LOMO lenses ARRI standard 32 pitch ( module 0.8 ) made from hard aluminum black anodized , fitting on lens with 4 screws ( in set with gear ring ) , you can himself to fit gear ring
THe price of gear rings :
LOMO roundfront anamorphic F = 35 - $ 150
LOMO roundfront anamorphic F = 50,75,100 - $ 85
Focus gear rings for LOMO prime lenses from set Konvas , Kinor - $ 85
Focus gear rings for Zoom lens 35OPF 29 - $85
Zoom gear ring for Zoom lens 35OPF29 - $ 85
Focus gear ring for Zoom lens 35OPF18 - $ 120
Zoom gear ring for Zoom lens 35OPF18 - $ 120
You can order any gear rings ..

[Sergey Kravchenco]

Below you can see photos Conversion LOMO anamorphic square front F = 80 mm on PL mount
Price of conversion - $ 450

[Sergey Kravchenco]

Below you can see photos Conversion LOMO Superspeed prime lens on PL mount
Lens was full restored - repainted barrels ,was made new engraving and was fit stainless steel PL mount

Price of conversion on PL mount - $ 450
New Focus gear ring ARRI standard 32 pitch - $ 85

[laurent couturier]

Hello Serguey

I'll be in StPetersbourg in September, i can bring 4 lenses to convert ( 28/50/75 and 100mm ) would you include full service as above ? thanks . I could make a jump to Moscow, why not . i already sent you pictures of my lenses months ago so you know which lenses i'm talking about .

Please could you send me more pictures of the 35mm HS above, the mount especially , because the lens needs to keep the ability to be service later if needed ( by otpitek, duclos, visual products or les bosher ) which means the conversion of the mount should be removable if needed .

Les Bosher told me the 28/50/75 high speed all and 100mm would be very hard to convert, and prefers not trying . He converted a 35mm HS ( like shown in the picture ) easily .

thank you Serguey, you have my email, i'll be happy to meet you by the way
over there ! and if you know someone who could help me with my photo project in St Petersbourg it would be great TOO :)

laurent