the fans would normally overlap a second PCIe slot. I'm using Aquacomputer coolers to fit the cards into a single slot. The coolers are awesome and not to expansiv, but their connector (Twinconnect) is terrible. I flooded my PC three times before it worked (fortunaltey I started a test run without plugging the PC in, powering the pump from an old power supply). Water was leaking out between the bridge and the cooler. It's possible to fix it with silicon sealant.
The Areca and the Blackmagic cards fit in between (I had to remove for both cards a srew on the watercoolers which were blocking their fans).
If I would set up a new system, I would rather take a different company then Aquacomputer, where it's possible to screw the plugs directly into the cooler. Just be sure that the connectors are high enough so they don't block other cards (the Areca is low profile anyway).
A good shop wich I would recommend:
If you have any questions, write me a pm.
PS: I'm not working for Aquatuning, I just had good experience with them
I worked hard for this problem, the system had problems installing Avid 5.0.3 and some soft of Foundry. SystemID did not recognize the machine (see screenshot).
Fixed bug with digital audio + USB+ increases system stability and performance + integrate 2 lan in table , now the ACPI tables are APPLE'S LIKE
Find the link to download in first post and find the new installer CUDA GENERATION .(this link have a utility for check systemID)
I recommend you backup your system!! so it does not work you can restart.
and download bios Pics (link first page for max stability settings)
I look forward to hearing from you
Last edited by luigivaltulini; 02-08-2011 at 06:16 PM.
ROHIT GUPTA and JOSE.
For best performance setting in DAVINCI DEBUG MENU
LsManager.3.NumGPUs = 2 ***GPU you HAVE in HACK**
LsManager.3.GPUMapping = 0 1 *** 0 1 2 .. GPU ***
LsManager.3.GPUMappingEnable = 1 *** 1 Default ***
SEe pics in my case 4 gtx
Hi luigivaltulini..thanks for your tutorials .
i have a Intel Core2 Duo Cpu E8400,Intel media series motherboard,4gb ddr3 ram
with quadro fx 1800..system..can i convert as a hackintosh and run Davinci for my learning purpose? please help me
sorry ..i dont have Mac system ,
here is my system details:-
motherboard:Intel media series DP35
Processor x86 Family 6 Model 23 Stepping 6 GenuineIntel ~2999 Mhz[Intel Core2 Duo Cpu E8400]
Quadro fx 1800
|« Previous Thread | Next Thread »|