Anyone used SmallHD DP6 with Epic or Scarlet via HDMI?

[Andrae Palmer]

hdmi and hd-sdi is not yet implemented in current firmware for Epic. But that is on the to do list.

Thank you Alexey... I was confused by this paragraph:

In its default configuration, the RED EPIC camera can simultaneously support one VIEWFINDER output (suitable for use by a BOMB EVF®, or RED LCD) plus one HD-SDI based PROGRAM output and one HDMI based PREVIEW output. Each output can support a set of overlay graphics including camera GUI, timecode, clip name and framing guides; the specific overlay graphics for each type of output is user configurable. --- Page 13 in the EPIc manual

[Reed Phillips]

I've been using 3 different DP6's through HDMI with no problems. I had a slight issue with a DP4, but a firmware upgrade from a 2.0.2 to 2.0.5 seems to have fixed it.

I do notice the SDI output into my DP6 has a funny refresh issue at the top of the monitor, as if it lags a bit. Anyone else notice this with their DP6-SDI monitor?

Hi Guys,
Dave from SmallHD support here. The bold part above is what the image flip trick fixes. It does not happen on all Red's. If, when you pan you get a little lag on the top 1/8th of the screen. Turning image flip on and mounting it upside down makes this stop happening.
Thanks for all the kind word's about the DP6!

[Michael Papavero]

Fired up fine for me. 720p output from the camera, straight into the DP6 with no adjustments.

Richard,
are you able to use the camera's false color and edge focus settings with the small HD?... in other words do these functions transfer through HDMI and HDSDI?

thanks

[Alexandre Desjardins]

Richard,
are you able to use the camera's false color and edge focus settings with the small HD?... in other words do these functions transfer through HDMI and HDSDI?

thanks

Yes, you can see RED's False Color and Edge Focus on the Small HD via HDMI and HD-SDI.

[Kemalettin Sert]

Yes, you can see RED's False Color and Edge Focus on the Small HD via HDMI and HD-SDI.

are you %100 sure on that?

[Alexandre Desjardins]

Yes, using it all the time.

are you 0 sure on that?

[Kemalettin Sert]

tried on marshall,tvlogic and panasonic monitors..none of them shows false color and other options with SDI feed.. (epic-x)

[Alexandre Desjardins]

It works on other monitors as well, do you have the HD-SDI output you are using set at "menus"?

tried on marshall,tvlogic and panasonic monitors..none of them shows false color and other options with SDI feed.. (epic-x)

[Victor Lazaro]

The DP6 is my go to monitor when it comes to critical focus. One thing is to output 1080p from the camera. The DP6 is able to process the 1080p signal and give you an even more accurate peaking for the focus, as well as a great 1:1 option.
I use it mainly on SDI as it is more reliable and I can chain it to the client monitor.

( I an not part of SmallHD, just a very satisfied customer, also did I mentioned that I LOVE their customer service and express overnight shippings when something is wrong?)