1fps - how to?

**Cam McGrath** · 02-19-2012, 10:14 AM

Hi all,
I've now read this is able to be achieved from a number of different sources on the internet and after sitting waiting patiently for lions to go hunting here in Africa and wanting to ping off a couple of timelapses at less than 8fps in the interim I've exhausted all combinations of timebase settings/resolutions. Can anyone shed some light on this little mystery for me please?

Cheers! Cam

**Chris Hagan** · 02-19-2012, 10:18 AM

Press the framerate to bring up the slider control then click the frame rate again. The interface will change to the framerate with plus and minus buttons. You can then click on that interface to bring up keypad to type in the framerate you want. In your case 1fps.

**Jeff Whitehurst** · 02-19-2012, 10:19 AM

On the LCD, hold down on the FPS readout and an advanced menu will appear. Now you can enter FPS number directly.

**TheBied** · 02-19-2012, 10:58 AM

Holding down on the item, or pressing up on the side handle or REDMote d-pad allows access to the quick/advanced entry menus

**Cam McGrath** · 02-20-2012, 02:06 AM

Thanks very much! All good now.

**Thibaut de Chemellier** · 02-20-2012, 02:59 AM

Can't go below 8fps with my Scarlet -X...I press on the framerate and then on "-" and the framerate goes up....???

**Ross Isaacs** · 02-20-2012, 03:14 AM

How does one do say 1frame every 10 seconds?

**Peter Majtan** · 02-20-2012, 03:52 AM

Originally Posted by Ross Isaacs

How does one do say 1frame every 10 seconds?

We all hope for this to be enabled with the STILL mode...

**Thibaut de Chemellier** · 02-20-2012, 04:35 AM

Ok I get it...Sometimes I'm so dumb !!!

**David Battistella** · 02-20-2012, 06:18 AM

Originally Posted by Ross Isaacs

How does one do say 1frame every 10 seconds?

In previous builds it was incremental. IE. punch in .25fps and you would fire a frame every 4 seconds, so you just had to do the math.

This functionality does not exist.

The EPIC is a ONE MODE ONLY Timelapse camera and that is

ONE FRAME PER SECOND.

This is far less functionality than the RED ONE M AND MX have.

I am hoping to see a "real" time-lapse mode (one we were used to with the R1) on the EPIC in an upcoming build.
The R! had really nice ramping features too, not sure why we lost all this great functionality with EPIC.

It's my top request here:

http://reduser.net/forum/showthread....-EPIC-Wishlist

David

Thread: 1fps - how to?

Thread Tools

Display