Click here to go to the first RED TEAM post in this thread.   Thread: SALT II results... (Part 1,2,3,4 Bokeh, Breathing & Flare and Part 5: Impressions)

Reply to Thread
Page 14 of 17 FirstFirst ... 41011121314151617 LastLast
Results 131 to 140 of 170
  1. #131  
    Senior Member Patrick Grossien's Avatar
    Join Date
    Nov 2008
    Location
    Germany
    Posts
    1,575
    Quote Originally Posted by Matthew Duclos View Post
    Yes. regardless of the manufacturer. There will always be variation in manufacturing and assembly. The difference is how much variation there is.
    The worst lens off a Canon L assembly line can be horrible whereas the worst lens off of a Angeneiux Optimo assembly line is just slightly less than perfect.
    Thank you so much. Its just good to know that I have to take that into account when buying a lense.

    So that also means that the 50mm could have been a bad apple? Or did you guys get the chance to check a different 50?

    SCARLET-X "Mathilda"

    "Life is full of obstacles. They never end. The ones that get past them have the richest life."
    jim jannard

    "if your pictures aren't good enough, you aren't close enough."
    robert capa
    Reply With Quote  
     

  2. #132  
    This is one of the best lens tests I have ever seen and I think the community has benefited greatly from all your efforts. I have a very tiny tip for Nikon owners that don't want the Nikon focus direction. I recently sold 6 ARRI FF2's on Reduser and almost every one contained a nifty Nikon reversal gear that attached to the FF2 making the focus direction "normal". These little gears were made by Samcine in the 70's and 80's, but I'm sure there are some floating around. Its a very simple device that could easily be replicated by any machine shop. In the attached photo the small piece with the white gear is what I'm talking about. I wish I had a better picture, because I think it is a very clever solution that has been overlooked and needs to be revisited. Hopefully, someone will find this useful :)
    Attached Images
    Clint Lealos
    Director of Photography

    Yeah, that's a forklift tattoo. I wasn't always a cinematographer :)
    Reply With Quote  
     

  3. #133  
    Senior Member
    Join Date
    Dec 2006
    Posts
    1,151
    Quote Originally Posted by Clint Lealos View Post
    This is one of the best lens tests I have ever seen and I think the community has benefited greatly from all your efforts.
    Thanks Clint, we all really appreciate hearing positive feedback.

    Matt Uhry
    www.mattuhry.com
    Reply With Quote  
     

  4. #134  
    Red Savant Steve Gibby's Avatar
    Join Date
    Dec 2006
    Location
    Southern Utah and worldwide
    Posts
    3,603
    Quote Originally Posted by Matt Uhry View Post
    we all really appreciate hearing positive feedback.
    Then here's some more:

    Very nice work Matt, Evin, and whoever else was involved!

    Hard to believe its now been well over four years since our L.A. Red Test event (12/07).
    Golden Gate 3D
    Executive Producer, Director, DP, Cinematographer
    Epic-M 0008, Epic X (2), RED One 0008, Red One "London"
    http://www.gg3d.com/ (Golden Gate 3D web site)
    http://redconnector.com/user/gibby (Bio & Equipment)
    http://www.artbeats.com/footage/search?fh44=1 (Artbeats Gibby RED Collection)
    Reply With Quote  
     

  5. #135  
    Senior Member Brian Pascale's Avatar
    Join Date
    Nov 2011
    Location
    Silver Spring, Maryland
    Posts
    169
    +1. Good information. I went with still glass because of price and size. If I start making feature films I will seriously consider cine glass.

    Quote Originally Posted by Clint Lealos View Post
    This is one of the best lens tests I have ever seen and I think the community has benefited greatly from all your efforts. I have a very tiny tip for Nikon owners that don't want the Nikon focus direction. I recently sold 6 ARRI FF2's on Reduser and almost every one contained a nifty Nikon reversal gear that attached to the FF2 making the focus direction "normal". These little gears were made by Samcine in the 70's and 80's, but I'm sure there are some floating around. Its a very simple device that could easily be replicated by any machine shop. In the attached photo the small piece with the white gear is what I'm talking about. I wish I had a better picture, because I think it is a very clever solution that has been overlooked and needs to be revisited. Hopefully, someone will find this useful :)
    Scarlet "Fever" Ti Canon Mount
    Brian Pascale
    Reply With Quote  
     

  6. #136  
    Senior Member Phil Holland's Avatar
    Join Date
    Apr 2007
    Location
    Los Angeles
    Posts
    2,314
    Just a note on Leica R lenses. I noticed when I went on my crazed hunt for Leica glass a few years ago the difference between the 90's and 80's (and earlier) lenses. All of my Leica R lenses are from 1996 and I'm very happy with them. I went through several different vintage 90s was able to see a difference in contrast, chroma, and CA.

    If I was recommending the first two Leica R lenses for anybody to get:

    The Summicron 90mm f/2

    (here's a distortion chart for the 90mm)


    And the Elmarit 60mm f/2.8 Macro:

    (here's a distortion chart for the 60mm)

    All of them are fair to good performers with the 180mm and up primes getting into the "scary awesome" zone.

    Another lens to look at is the Voigtlander 40mm f/2 SLII. Wide open it's not the best thing on earth. It got a unique feel, built very well, and is extremely compact.


    (here's a distortion chart for the 40mm)

    While not officially supported by Red's Canon AI mount as of 03.01.2012, I can confirm that the EF version indeed works on the Epic and Scarlet just fine.
    Phil Holland - Cinematographer - Los Angeles
    ________________________________
    phfx.com IMDB

    Scarlet-X #316 "Skully"
    Data Sheets and Notes: Epic M & X, Scarlet X & Red Dragon
    Red Quick Reference Guide (link to 52MB PDF)
    Reply With Quote  
     

  7. #137  
    I'm pretty sure the last generation 28mm Elmarit ROM is a new and very sharp design.
    "All art is deception."

    My DP reel...
    http://www.evingrantdp.com
    http://www.YouTube.com/evingrant
    360º Cinematography and camera rigs...
    http://www.360dop.com
    Reply With Quote  
     

  8. #138  
    Senior Member
    Join Date
    Apr 2007
    Posts
    789
    Thanks for the test fellas!
    Regards,
    Paul Engstrom

    RAW CAMERA CO.
    boutique Epic rental, on/near set & post-production service, elite training

    Optimally Accessorized Epic Camera packages for movie, television and commercial productions
    Arri Master Primes, Arri Ultra Primes,
    Fujinon Cabrio Zooms, Angenieux Optimo Zooms, Arri Alura Zooms
    Arri MBs, Bright Tangerine MBs, Arri FF4s, Preston FIZ, Oconnor 2575s + everything you need
    Reply With Quote  
     

  9. #139  
    Senior Member Jacek Zakowicz's Avatar
    Join Date
    Jun 2008
    Posts
    1,756
    I always wonder why anybody would use a macro lens designed for, uh, macro photography and optimized for close up work for normal distances. There are lenses designed for normal work....
    And BTW I know how these lenses look -I've projected lenses for 25 years- it's my business....
    Jacek Zakowicz, Optitek-dot-org, jacek2@optitek.org
    Professional Broadcast and Digital Cinema Equipment
    Reply With Quote  
     

  10. #140  
    The reason that the Macro lenses are sometimes preferred is their performance often times exceed that of their normal distance cousins, of course focus scales are usually abbreviated in the far distances though. Also some focal lengths (60mm specifically) are hard to come by in non macro.
    "All art is deception."

    My DP reel...
    http://www.evingrantdp.com
    http://www.YouTube.com/evingrant
    360º Cinematography and camera rigs...
    http://www.360dop.com
    Reply With Quote  
     

Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts