Beta Camera Build 3.2.8

[Vino Harris]

Hey Red Team
I know I am beating a dead horse but there is no harm in asking for slow mo in 2k or 3k because I really need it.
I don't have the cash to rent a Epic for one or two slow mo scenes in my movies and the after market twixtor is not a solution.
Idea......what about a firmware update that will put the camera in a slow mo setup with a high frame rate like 200 -300 2k or 3k? After I use it I can roll the Scarlet back to the regular firmware update =)

Oh well...it was an Idea=)

[Adam Howden]

Mostly I'm loving 3.2.8 but I've noticed a couple of got ya's.

If you don't have a touchscreen and are only running a redmote and EVF; there is a option to turn off the navigation keys when you lock/create a lock for the side handle. This basically locked me out of being able to control the menu via the side handle and meant I had to do a force upgrade to 3.0.0 so reset it all, then re-upgrade again - not too painful but not great.

Also, desperately need to be able to run menu navigation over both HD-SDI and in the EVF simultaneously!

[Jeffrey T. Morgan]

Anyone else using 3.2.13? I am curious to hear a few more thumbs up before trying it myself, lol.

[Peter Stadelmann]

Anyone else using 3.2.13?

Updated and works great. Absolutely no problems at this time!

My Touch-LCD works much better as before. Someone noticed that also?

[Trent Lillehaugen]

Mostly I'm loving 3.2.8 but I've noticed a couple of got ya's.

If you don't have a touchscreen and are only running a redmote and EVF; there is a option to turn off the navigation keys when you lock/create a lock for the side handle. This basically locked me out of being able to control the menu via the side handle and meant I had to do a force upgrade to 3.0.0 so reset it all, then re-upgrade again - not too painful but not great.

Also, desperately need to be able to run menu navigation over both HD-SDI and in the EVF simultaneously!

By default you can toggle the side handle key lock by pressing the 1 and 4 keys on the side handle simultaneously.

Are you saying that when you had the side handle keys locked you were unable to navigate the menus using the REDmote?

[Jeffrey T. Morgan]

Updated and works great. Absolutely no problems at this time!

My Touch-LCD works much better as before. Someone noticed that also?

Thanks!

[Tyrone Braithwaite]

No one commenting on the new beta release?

https://www.red.com/downloads?release=beta

BETA v3.2.13

Went on fine on our Scarlet and Epic this morning.

Significant changes since previous build v3.2.8:

• Fix for record error 0×00001E seen on some cameras
• Fix for multi-clip load issue in Playback
• Fix for audio in HDRx mode
• Added HDMI 1080p/720p refresh rates of 24,25,30,50,60
• Enhanced Gyro collection
• Enhanced Playback load notifications

Operational notes specific to Build v3.2.13:

• Sensor Flip disabled
• Detaching monitor during playback will require reboot on monitor re-attach
• Camera powered by RED BRICK may display voltage instead of battery capacity on some cameras.
• EVF black level raised in some cases
• ISO setting limited to min of 250
• Image Magnify is available during preview, but not during recording.
• HD-SDI is True Progressive and does not support 1080i or 1080 PsF signal formats.

[Peter Stelzhammer]

in case anybody followed my recent posts -> the shoot on 3.2.8 went well -> no problems or glitches at all; phantom power worked as advertised, 5K HD is also very nice. Didn't have additional monitors attached (touch LCD only) so I can't comment on the monitoring part...

as for the 3.2.13 update;
on the first boot after the update I had a "split" LCD screen -> the right half was white, left side was fine. Didn't try to un/re-plug the cable this time and just shut down the camera -> at the next boot everything was fully working and fine - proper picture, proper behavior and so on. Everything is running smooth now and I'll stay with the beta-build (5K HD and phantom power is a big plus for me so I can totally justify using a beta-build at our current project [which are more like IV-stuff, nothing "big" or "critical"])...

[Antony M]

This thread is so last week :-)

When will the 3.2.13 thread appear?

[TheBied]

This thread is so last week :-)

When will the 3.2.13 thread appear?

I agree...

http://www.reduser.net/forum/showthr...70#post1013070