Beta Camera Build 3.2.13

[luigivaltulini]

i have a problem with this beta firmware...
black shading is usable only in factory mode with this all ok normal and slow motion , but when i use black shading in user mode calibration my epic after 75 fps have a line horizontal.

http://www.reduser.net/forum/showthr...IN-SLOW-MOTION

whit 3.0.7 is ok.
i wait next update....

[Harry Lipnick]

A Feature Request:
I really really like the new inclusion of the Slate information. I typically like to have dailies made with BITC and burned in Shot/Take info (at least for narrative stuff) so being able to code this into the metadata in camera obviously saves a lot of time. Hopefully in RCX 15 we'll be able to get to the metadata?
Anyway...here's the request: please let us set up slots on the REDMOTE to correspond to Scene and Take. I know take auto increments, but it would be nice to have control from the remote without having to dig through the camera menus. Basically, for those of us not using touch screens (myself included) it would be really nice to have a flick of the wheel increase or decrease the scene info (1A, 1C, 1D, back to 1B when necessary) and then maybe another modifier key to get through the actual numbers (1A, 2A, 3A, etc.) Alternatively, perhaps the number and letter could each be given their own slot on the REDMote so that it would be super easy to control, while still being coded into the metadata as a single field. So it might look something like this:
https://www.dropbox.com/s/b1r66dfq6z...EDMOTEIdea.jpg

Thanks,

-Harry

[TheBied]

I was the one who originally, previously posted the card full record problem. My Scarlet exhibits the same behavior, exactly. When I reported this, a Red team memeber posted they were unable to reproduce the problem. But you have, precisley. I was hoping this issue would disapear with 13. Not yet, I suppose.

We've tracked this one down. There will be an update shortly to address it.

I've updated my original post with a known issues section for 3.2.13

[Brant Hadfield]

That's terrific news. That, and the HDRx audio issue are the only known issues I've had with these Beta editions. Although, I am still thinking the HD-SDI output levels may be too low. Scarlet's house bars, 100% white still seem to clip at 95 or so if I'm not mistaken.

We've tracked this one down. There will be an update shortly to address it.

I've updated my original post with a known issues section for 3.2.13

[Elizabeth Lowrey]

We've tracked this one down. There will be an update shortly to address it.

I've updated my original post with a known issues section for 3.2.13

Matt, any progress on the known issue of camera crash/immediate power off instead of automatically swapping power to the REDvolt in the side handle when power is removed/runs out from V-mount/external source?

[TheBied]

Matt, any progress on the known issue of camera crash/immediate power off instead of automatically swapping power to the REDvolt in the side handle when power is removed/runs out from V-mount/external source?

If you're seeing this, you should contact RED Support and they will be able to help you out. It's most likely not firmware related.

[Mike Tiffee]

Known Operational Issues:

• Recording to the end of media while in HDRx mode OR while recording audio may prevent the camera from completing the current clip.
• Mapping some actions (ISO, White Balance) to the rocker switch ofthe REDmote or side handle may cause the camera to hang.
• LCD's on some cameras are showing a white or half white image on start-up

A quick reinstall of the FW fixed the LCD white screen problem I was having.

[Burke Doeren]

Matthew, Glad to hear that you and the RED Team are fixing the end-of-SSD Recording issue. I shot over a Terabyte of footage over the weekend, and after this happened I stopped recording at 3% just for safety. Thank you for submitting this to be fixed promptly.

I've noticed that when I have my camera plugged into D/C power AND I have a fully charged REDVolt in the Side Handle, it will simply shut off if I cut the D/C power, rather than staying on and swapping power to the REDVolt. I figured this was a future update issue, but from what you said, it sounds like it may be another issue.

Is this common, or is this something I should contact my Bomb Squad agent about?

[Burke Doeren]

To clarify, I am using dual power sources - both RED's DSMC A/C power adaptor, and a REDVolt in the side handle. Should it swap power back and forth automatically? Currently it swaps from the REDVold in the side handle to external power perfectly fine, but it does a hard shut off if I go from external power to the side handle.

[TheBied]

To clarify, I am using dual power sources - both RED's DSMC A/C power adaptor, and a REDVolt in the side handle. Should it swap power back and forth automatically? Currently it swaps from the REDVold in the side handle to external power perfectly fine, but it does a hard shut off if I go from external power to the side handle.

The power should swap automatically. Contact your bomb squad rep and they should be able to help you out.