The Meizler Module... The Details.

[Jarred Land]

Shown with EPIC BRAIN ( not included ) installed.

Pre-orders begin September 10th. Ships Mid November.

Meizler Module $13,000


Weight: Aprox. 6 lb


Features:

• Proxy Recording - Record Proxy files to a RED MINI-MAG card and record REDCODE RAW to side SSD simultaneously.
• Wireless Motor Control – Integrated Wireless communication between 3^rd party hand controller and Meizler module. Internal wiring to front outputs for clean cable routing.
• Wireless Video – Transmit 720p or 1080p uncompressed video at 5Ghz. Wireless video system has <1ms latency.
• Wireless Audio – Receive audio signals from REDsync Master (optional purchase)
• Wireless Timecode -Receive wireless timecode from REDsync Master ( optional purchase )
• 802.11b Compatible – Receive system control commands from custom iPad/iPhone/iTouch app through REDsync system
• System power is provided by V-Lock IDX battery plate , (IDX and RED data switch), or RED standard 6 pin power port.
• Smart Hot-Swappable Power supported (battery can be switched when plugged into DC power without shutting camera off)
• CAN Port – Allows for Hardwired communication between the 3ality Technica hand controller and Meizler module
• RS232/422 Port – Hardwired communication for iPad, iPhone and iTouch apps and 3^rd party devices
• 3D Port – Sync two Meizler modules together to create a 3D lens control system
• HD-SDI Port – Output HD video
• REDmote Port – Charges and Communicates with REDmote viadirect hardwire
• RED Monitor Port – Support Dual RED EVF/LCD operating simultaneously via monitor ports on Meizler and Side SSD. Touchscreen control capability on the RED monitor.
• Gig-E Port – Master/Slave the RED cameras
• 4 unregulated AUX power outputs
  • Two 12V output power on right sidecar,
  • One Left side D-tap on battery plate,
  • One Front 3-pin Fischer for Cinetape or other accesories
• Audio Port – Hardwired 2ch balance audio input
• Headphone Jack – Outputs audio signals 3.5mm
• Lens Ports Front
  • Control 3^rd party lens motors for Focus, Iris and Zoom
• LEDs
  • STATUS Indicates the Meizler module status state
  • 8.02.11 Indicates the wireless connection for Wireless.
  • PROXY Indicates the proxy recording status to the MINI-MAG
  • THCL Indicates the wireless connection for wireless hand controller
  • WTCL Indicates the wireless connection for wireless timecode
  • WVL Indicates the wireless connection for wireless video
  • FOCUS Indicates the focus motor status
  • IRIS Indicates the iris motor status
  • ZOOM Indicates the zoom motor status
• Wireless Internal Antennas
  • Interchangeable 6 external antenna module
• Switch from internal or external timecode
  • Internal timecode – Receive wireless timecode from REDsync Master (optional purchase)
  • External timecode – Receive timecode signal from an external source (i.e Lockit, Denecke and etc) via a BNC and genlock is produced internally
• Report camera state back to iPad app (optional purchase)
• Receive sidebar file metadata from REDsync Master (optional purchase)
• Receive GPS via iOS app (optional purchase)

REDsync Master - $2900


Weight: Aprox. 1lb


Features:

• RF ISM Band Transceiver 865MHz/915Mhz for wireless audio and timecode
  • Deliver audio stream to multiple devices
• 802.11b Transceiver
  • Receive and deliver timecode and metadata to multiple devices
  • Able to connect up to 14 devices
• Supported FPS modes: 23.98, 24, 25, 29.97, 30, 29.97DF, 30DF.
• Output sync modes: PAL, NTSC, 720p, 720p double frame, 1080i, 1080p, 1080i double frame, 1080p double frame
• V Sync and H Sync Output to Camera
• Timecode Output to Camera
• Timecode output to audio recorder
• 2 channel guide audio input for RF datalink distribution to camera(s) and other devices
• Interface to iPad, iPhone & iTouch apps

Physical Interfaces

• External Power
• Timecode input
• Timecode output
• Output Video Sync
• 48Khz 16bit audio input
• Internal Power: 2 x ‘AA’ batteries

HD-SDI Receiver - $3400


Weight : Aprox. 1.3 lb


Features:

• Any camera can transmit to any combination of up to 4 receivers (HDMI or HD-SDI)
• Transmission is secure between the camera and receivers.
• Less than 1ms lag
• HD-SDI receives up to 200ft away from Camera.
• 5 external SMA mount.

HDMI Receiver - $1100


Weight: Aprox. 0.5 lb

Features:

• Any camera can transmit to any combination of up to 4 receivers (HDMI or HD-SDI)
• Secure Transmission secure between the camera and receivers.
• Less than 1ms lag
• HDMI receives up to 90ft away from Camera.
• Internal antennas

[Kevin Wild]

Wow. Great looking stuff. Prices ready for release?

[Felipe Abreu]

A Whole New camera!! That's why I love this company, any other company would release a new product, red allows us to do with hardware what was only possible with software. obsolescence is now just history. Can't wait to see this one at Red Store.

[jacob.schwarz]

Love it. That Jarred for the update. What the price point on the minimags?

[brett ogden]

Curt Pair posted about Red Snyc in June glad it's out Now =D

[Brian Iannone]

Wow.

How did you get all that to fit in there...? :)

[brett ogden]

Jarred what about pics of the RED SNYC and the RED SNYC MODULE Heh heh Heh

[Nick Wernham]

This looks unbelievable. It's so impressive that you guys were able to fit this amount of functionality into just one module. Awesome work.

[Alex.Mitchell]

As a location sound mixer, I'm curious about the dimensions of the RedSync Master. Also, I'm really hoping that 24kHz audio @ 16 bit is a typo. 48 kHz is kind of the minimum, no?

[Sulekh Suman]

Hi Jarred,

Do you have a timeline by which to expect more details about Proxies on Meizler module?

Thanks,
Sulekh