REDUSER.net

Go Back   REDUSER.net > Red Digital Cinema > Recon

Reply
 
Thread Tools Display Modes
Old 12-01-2009, 11:27 AM   #661
Hrvoje Simic
Senior Member
 
Hrvoje Simic's Avatar
 
Join Date: Jan 2007
Posts: 1,465
Default

Quote:
Originally Posted by David Cherniack View Post
If I understand your touchpad idea it's basically the same principle as a joystick. Either way, I think a cursor to ID the focus point is necessary on the LCD/VF...and then a button to engage the mechanism.

David
Maybe I was not clear enough. The touchpad idea depends on the cursor you mentioned, which would have to be more like a few points around an empty space - for example that Predator movie three dot thing might work. It also depends on another button for activating focusing which would have to be also on the handle but under pointing finger. This seems like the most natural, and most intuitive solution to me.

What I tried to explain is that with touchpad you'd have a non linear realtime control over monitor surface and reaction speed dependent only on your thumb speed (no digital path lag) which in the case of a joystick you'd miss, or it would be unnatural - digitally controlled by strength or angle of pressure, hence limiting. One example which might be close enough is computer gaming world where there is absolutely no chance you can be as fast and precise with a joystick or controller as with a mouse, because mouse is as fast as your hand is. You can also imagine controlling your computer cursor with a joystick.
__________________
"Como delfines en el fondo del oceano
volamos por el universo incentivados por la esperanza"
"L'esperanza", Sven Väth
"It's a poor sort of memory that only works backwards"
Jung/ Carol
Hrvoje Simic is offline   Reply With Quote
Old 12-01-2009, 11:28 AM   #662
Jesper Sichlau
Senior Member
 
Join Date: Sep 2008
Location: Copenhagen, Denmark, Scandinavia, Europe
Posts: 124
Default

Hi any info on prices for battery bricks and chargers?
Jesper Sichlau is online now   Reply With Quote
Old 12-01-2009, 11:38 AM   #663
Kenneth Elkington
Senior Member
 
Join Date: Dec 2008
Posts: 283
Default

What about the ND filter wheel on the 8x? Can we get the specs on what levels are included? Are they IR/ND filters(is that even an issue anymore?)?
Kenneth Elkington is online now   Reply With Quote
Old 12-01-2009, 11:45 AM   #664
Jarred Land
Fire Chief
 
Jarred Land's Avatar
 
Join Date: Dec 2006
Posts: 4,498
Default

Quote:
Originally Posted by Kenneth Elkington View Post
What about the ND filter wheel on the 8x? Can we get the specs on what levels are included? Are they IR/ND filters(is that even an issue anymore?)?
3 Positions.. OFF, .9ND and 1.8ND.
Jarred Land is offline   Reply With Quote
Old 12-01-2009, 11:45 AM   #665
Lawrence Bansbach
Senior Member
 
Join Date: Feb 2008
Posts: 215
Default

Does 2/3-inch Scarlet still have HDMI out?
Lawrence Bansbach is online now   Reply With Quote
Old 12-01-2009, 11:47 AM   #666
Miklos Konczol
Member
 
Miklos Konczol's Avatar
 
Join Date: Mar 2008
Posts: 63
Send a message via Yahoo to Miklos Konczol
Default

Quote:
Originally Posted by Lawrence Bansbach View Post
Does 2/3-inch Scarlet still have HDMI out?
yes, first look than ask
Miklos Konczol is offline   Reply With Quote
Old 12-01-2009, 11:50 AM   #667
zak forrest
Senior Member
 
zak forrest's Avatar
 
Join Date: Feb 2007
Location: Maryland + LA
Posts: 1,089
Default magnesium

What is the difference between the two body types?

What does Magnesium offer ?
__________________
http://www.zf-films.com
Washington D.C • Los Angeles • New York • Cleveland
zak forrest is offline   Reply With Quote
Old 12-01-2009, 11:52 AM   #668
Richardvclark
Member
 
Join Date: Sep 2007
Posts: 51
Default

The UI looks very slick. I can't wait to be shooting in Pittsburgh with my S35 this summer. I am sure it will beat the hell out of the beach.
Richardvclark is offline   Reply With Quote
Old 12-01-2009, 11:56 AM   #669
Steven Hilder
Member
 
Steven Hilder's Avatar
 
Join Date: Sep 2008
Posts: 58
Default

Quote:
Originally Posted by Stuart English View Post
Yes, frame guide choices are independent per monitor output. Lots of flexibility here.

So just as one example - the camera's default operational setup - a 5" touchscreen LCD may be showing full camera menus plus Look Around and Frame Guide graphics, the HDMI output may be providing a 720p Preview Output with Safe Action and Safe Title, and the HD-SDI output (on EPIC bodies, or either I/O module) may be providing a clean feed (no graphics) 1080p Program Output.

Monitor output resolutions are also very flexible, so for each output we can scale the monitor path information to support 720p or 1080p or 800 x 480 etc....
Great to hear, thanks Stuart.
__________________
Steven Hilder
Professional software developer | Amateur cinematographer
Steven Hilder is online now   Reply With Quote
Old 12-01-2009, 11:57 AM   #670
Radim Schreiber
Senior Member
 
Radim Schreiber's Avatar
 
Join Date: Oct 2008
Location: Fairfield, Iowa, USA
Posts: 138
Default

Even though these products are not fully out yet, it would be nice to have comparison chart to compare different products and their versions, especially Scarlet and Epic.
Radim Schreiber is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -7. The time now is 10:15 AM.


All Content Copyright Landmine Media, Inc. 2010