PDA

View Full Version : Jetpack SDI



Jarred Land
04-16-2016, 03:16 PM
To all of you who kept bugging us to make a SDI version of the Jetpack....

You win.

DSMC2 Jetpack-SDI
$1250
http://www.red.com/store/products/dsmc2-jetpack-sdi-expander

http://www.redgrabs.com/up/1460885061.jpg

ESTIMATED TO BEGIN SHIPPING IN FALL 2016

The DSMC2™ Jetpack-SDI Expander is designed for aerial, gimbal, handheld, and other lightweight/remote applications that require 3G-SDI output. Featuring connections for power (DC IN), SDI (3G-SDI), Gigabit Ethernet (GIG-E), AUX power, SYNC, and CTRL, the DSMC2 Jetpack-SDI Expander provides a low-profile expander solution. The 3G-SDI connection provides support for providing a signal to a remote monitoring solution, while the Gigabit Ethernet connection offers increased bandwidth for streaming high-quality footage.The DSMC2 Jetpack-SDI Expander is ideal for housings and low-profile configurations that require 3G-SDI outputs or computer tethering.

The DSMC2 Jetpack-SDI Expander also features a selector switch that enables the DSMC2 BRAIN to automatically boot when power is provided via the DC IN connector on the expander. This feature allows you to use a connected DC input supply to turn the BRAIN on and off when the camera is mounted in remote or difficult to maneuver locations.

DSMC2 Jetpack-SDI Expander


DIMENSIONS
Height: 4.57 in. (116 mm)
Width: 3.54 in. (90 mm)
Depth: 1.46 in. (37 mm)


WEIGHT
0.56 lbs (253.6 g)


MATERIAL
Magnesium


BRAIN MOUNTING
4x M4 captive mounting screws


BRAIN CONNECTIONS
Power delivery via WEAPON Rear pogo connector (13-Pin)
Communication via WEAPON Rear I/O connector (440 Pin)


CONNECTORS
DC IN (6-Pin 1B LEMO socket)
3G-SDI output (75 Ω BNC), 60 Hz max frame rate
Gigabit Ethernet input/output (9-Pin 0B LEMO)
Aux Power Output (2-Pin 0B LEMO), 1.5 A
SYNC (Genlock IN / Timecode IN / Sync IN) (4-Pin 00B LEMO socket)
CTRL (Tally OUT / RS-232 Rx and Tx) (4-Pin 00BLEMO socket)


AUTO BOOT ON POWER
2-position slider switch


OPERATING TEMPERATURE
0C to 40C (32F to 104F)


STORAGE TEMPERATURE
–20C to 50C (–4F to 122F)


OPERATING HUMIDITY
0% to 85%, non-condensing


STORAGE HUMIDITY
0% to 85%, non-condensing


FIRMWARE REQUIREMENT
Compatible with all DSMC2 firmware v6.3 or later

Brian F Kobylarz
04-16-2016, 03:18 PM
Everybody wins.

Kudos to a company that listens and responds.

See you at the show Jarred.

Chris McKechnie
04-16-2016, 03:18 PM
Here we go kids!

David Battistella
04-16-2016, 03:27 PM
Let the games begin!

Alexander Thomson
04-16-2016, 03:28 PM
Wooooohooooo!

luigivaltulini
04-16-2016, 03:43 PM
:thumbup:

Stivan Widick
04-16-2016, 03:45 PM
Sold!

Reuben Evans
04-16-2016, 03:57 PM
I kinda like not having to up at 1am for this :-)

Brent Carter
04-16-2016, 04:12 PM
Live for order on RED.com (http://www.red.com/store/products/dsmc2-jetpack-sdi-expander).

ignition
04-16-2016, 05:55 PM
Tx RED.. Teradek kit is feeling your love =)

Reuben Evans
04-16-2016, 08:05 PM
Wait a second. Did you guys just swap out the pic? lol I believe it just got a gig E upgrade in the past couple hours :-)

Jarred Land
04-16-2016, 08:28 PM
Things move quick around here :)

Reuben Evans
04-16-2016, 08:52 PM
Things move quick around here :)

That's service!

Eric Haase
04-16-2016, 10:14 PM
Good riddance HDMI!!!! :)

Mark Pedersen
04-17-2016, 07:56 PM
Any upgrade options for those who ordered the original HDMI version and never used it?? :)

M

Noah Yuan-Vogel
04-17-2016, 08:05 PM
Finally an expander with gig-e, pretty odd this has it but the base expander doesn't.

Jens Jakob Thorsen
04-18-2016, 01:32 PM
THANK YOU VERY MUCH!

Tommaso Alvisi
04-19-2016, 03:06 AM
Hey Jarred, this is even better than anticipated with its GIG-E port!

Do you know if it's compatible with the right-angle Lemo to RJ45 just appeared on the store?

I'm asking because the Lemo receptacle on the Jetpack is recessed a little and the angle is downward (which is great) but can the right angle be inserted fully?

Thanks!

Mike Finegan
06-03-2016, 02:42 PM
Any update on when this will be available? I believe store says fall; would be super nice if available this summer so we don't have to buy a 'throw away' adapter to use Raven until it is available

Tony Hernandez
07-21-2016, 08:31 AM
Any update. Is there any place where I can see the connector for power output ? Do you know how many Volts can supply ? Looking for 12V And as for the gig e Does it have 8 pin or 9 ?

John Waldorff
11-04-2016, 05:21 PM
This new product looks exactly what we are looking for.
Could you please clarify how to power this via DC IN (6-Pin 1B LEMO socket). What is needed? I'd like to feed this input with v-mount batteries.

Stacey Spears
11-04-2016, 06:39 PM
This new product looks exactly what we are looking for.
Could you please clarify how to power this via DC IN (6-Pin 1B LEMO socket). What is needed? I'd like to feed this input with v-mount batteries. It is the connector that is on their AC power adaptor (http://www.red.com/store/products/ac-power-adaptor-150w-dsmc) and DSMC battery belt clip (http://www.red.com/store/products/battery-belt-clip-dsmc). The idea is that the power for this comes from the gimbal.

John Waldorff
11-05-2016, 04:32 AM
It is the connector that is on their AC power adaptor (http://www.red.com/store/products/ac-power-adaptor-150w-dsmc) and DSMC battery belt clip (http://www.red.com/store/products/battery-belt-clip-dsmc). The idea is that the power for this comes from the gimbal.
Thank you. Now I get it. :)